Peste 4 milioane de titluri în engleză și alte limbi! Descoperă-ți noua poveste astăzi!

Beginning STM32

Name: Beginning STM32
Brand: Springer, Berlin
SKU: 9798868801983
Price: 244.52 RON
Availability: InStock

Developing with FreeRTOS, libopencm3 and GCC

Autor: Warren Gay

Limbă:

Legare: Carte broșată

Editura: Springer, Berlin

Disponibilitate: În depozitul extern

Expediem în 9-15 zile

244.52 lei

Using FreeRTOS and libopencm3 instead of the Arduino software environment, this book will help you d...

Informații despre carte

Autor

Warren Gay

Limbă

engleză

Legare

Carte - Carte broșată

Publicat

2024

Pagini

552

EAN

9798868801983

Enbook ID

44619619

Editura

Springer, Berlin

Greutate

833

Dimensiuni

178 x 254

Descriere completă

Using FreeRTOS and libopencm3 instead of the Arduino software environment, this book will help you develop multi-tasking applications that go beyond Arduino norms. In addition to the usual peripherals found in the typical Arduino device, the STM32 device includes a USB controller, RTC (Real Time Clock), DMA (Direct Memory Access controller), CAN bus and more. Each chapter contains clear explanations of the STM32 hardware capabilities to help get you started with the device, including GPIO and several other ST Microelectronics peripherals like USB and CAN bus controller. You'll learn how to download and set up the libopencm3 + FreeRTOS development environment, using GCC. With everything set up, you'll leverage FreeRTOS to create tasks, queues, and mutexes. You'll also learn to work with the I2C bus to add GPIO using the PCF8574 chip. And how to create PWM output for RC control using hardware timers.You'll be introduced to new concepts that are necessary to master the STM32, such as how to extend code with GCC overlays using an external Winbond W25Q32 flash chip. Your knowledge is tested at the end of each chapter with exercises. Upon completing this book, you'll be ready to work with any of the devices in the STM32 family. Beginning STM32 provides the professional, student, or hobbyist a way to learn about ARM without costing an arm!For this New Edition: This edition addresses the needs of Windows users by expanding "Chapter 2 Software Setup" to provide comprehensive support for Windows 10 and 11. Discover the expanded STM32 hardware capabilities, including clear explanations of "totem pole outputs" versus "open drain outputs" in the expanded "Chapter 4: GPIO." Additionally, "Chapter 6 USART" introduces a new section and project showcasing an interrupt-driven approach for processing USART data.What You'll Learn Initialize and use the libopencm3 drivers and handle interruptsUse DMA to drive a SPI based OLED displaying an analog meterRead PWM from an RC control using hardware timersWho This Book Is ForExperienced embedded engineers, students, hobbyists and makers wishing to explore the ARM architecture, going beyond Arduino limits.

Cele mai căutate

Categories

Authors

Publishers

Produse

Produse

Cele mai căutate

Categories

Authors

Publishers

Produse

Produse

Beginning STM32

Developing with FreeRTOS, libopencm3 and GCC

Informații despre carte

Descriere completă

S-ar putea să te intereseze

Clienții care au cumpărat această carte au mai cumpărat și